1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Can I use a 9 pin connector in place of an 11 pin?

Discussion in 'Truck & Equipment Repair' started by jrlegacy23, Oct 15, 2015.

  1. jrlegacy23

    jrlegacy23 Junior Member
    Messages: 10

    I am putting a fisher MM plow on my 06 Dodge 2500. I picked up a used 3 plug control module with most of the wiring. The truck side lights plug is an 11 pin, and got crushed. I am a tight budget and found this 9 min repair connector:
    My question is, can I just wire this 9 pin connector in, and then cap off the 2 extra wires? The plow side, bought the plow separately, only has 7 pins in it.
  2. bmc1025

    bmc1025 Member
    Messages: 33

  3. jrlegacy23

    jrlegacy23 Junior Member
    Messages: 10

    it is what I need, but really did not want to spend $150 on a wire. I was hoping there would be another way around it.
  4. Randall Ave

    Randall Ave PlowSite.com Addict
    Messages: 1,409

    Get a wiring diagram from website, are all the wires used?
  5. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,739

    4 pins are different size and therefore you won't get those to work.