1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Can i get this part? or have to fab it?

Discussion in 'Meyer / Diamond Products Discussion' started by birddseedd, Jan 18, 2014.

  1. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    [​IMG]

    The part i need, i doubte i can get. in the diagram i need the 4 "tabs" above the number 8 and the number 5. Part of the mount where your pin goes through.

    Some parts i can get, inbetween 20 and 21. "Mounting Ear (Hinge Connector)". But i cant seem to find the mount parts unless i buy a whole new mount.

    :waving:
     
  2. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

  3. JeepCoMJ

    JeepCoMJ Senior Member
    Messages: 284

    That link is the mount side.
     
  4. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    Yes. I need to repair my mount
     
  5. jmac5058

    jmac5058 Senior Member
    Messages: 428

    Bird cant you just cobbel it back together with bailing wire and bubbelgum ?
     
  6. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    Sure I can. but if i have time and am not in a hurry to get back on the road, why not make it stronger?
     
  7. Sawboy

    Sawboy PlowSite.com Addict
    Messages: 1,591

    Best bet is to call a dealer on Monday. That will give you the definitive answer. Ok, we can close this thread now.
     
  8. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    I called a whole crap load of them yesterday. meyer support kinda sucks. tho iv also looked at a bunch of online dealers. i cant find the part. pretty sure they don't make it separatly.
     
  9. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    You just want the tabs? Or the bar across too
     
  10. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    Just the tabs. I cut the original ones out to match it to the western a frame. now that iv got time im going to redo it in a much better way.
     
  11. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    Maybe have a fabricator cut them out if you have time. The ones at the stork link Dont look right. Mine have 3 adjustments.

    Worse case look on cl for a used mount and salvage the tabs
     
  12. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    The link i showed would be the A-frame side.
     
  13. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    You have a western a frame and Meyer mount?
     
  14. Dogplow Dodge

    Dogplow Dodge 2000 Club Member
    from NJ
    Messages: 2,979

    Didn't you read his signature ?
     
  15. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    A frame and quadrant and blade and lift frame from a couple different westerns. meyer mount and part of a jeep bumper.

    i want to convert it to electric, might get a fisher pump and controls.
     
  16. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    I'm just trying to figure out which parts are what lol. Plenty of people have frankenstain setups on here but he's the only one that gets ****
     
  17. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    because I talk about it. others don't.
     
  18. JeepCoMJ

    JeepCoMJ Senior Member
    Messages: 284

    The link shown is NOT the a frame side. That is the truck side.

    The a frame side is a straight bar with a 20 or so degree bend.
     
  19. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    I do not know exactly where that part goes to. i was going to put it on the back of my a frame as it is currently like that. if i put a connector on the top, that will lower the back of the a frame changing my cutting edge angle.

    but that is not what goes to my mount. my mount is in the V corner of a piece of angle iron.
     
  20. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    Take some pictures of your setup so we can help