1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cab Command Question

Discussion in 'Western Plows Discussion' started by Eddie D, Feb 13, 2008.

  1. Eddie D

    Eddie D Member
    Messages: 38

    I bought 2 new cab commands today to go on one truck with an 8' ultra mount and another truck with a 7.5 uni mount.

    The ultra mount worked fine with both commands. The 2 commands did not work in the uni mount. When I plugged the joy stick back in it worked. So for some reason just the cab commands do not work. They did not light up or anything.

    Any suggestions???
  2. rbs299

    rbs299 Junior Member
    Messages: 9

    I think it is a signal issue.... Mine did the same thing. I had to buy another one for my uni mount plow as back up and a different one for my ultra mount as back up.
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You have to do a small mod/check the ground wire in the control harness on the early Uni's to use a cab command controller...

    Here's the install manual: Cab Command Retro