1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Bronco fittment of a western Pro

Discussion in 'Western Plows Discussion' started by captbo, Dec 22, 2009.

  1. captbo

    captbo Senior Member
    Messages: 112

    I just bought a used Western Pro from a guy who said it would fit a bronco/ f seris I have a 1992 bronco that ove rthe years has begged me for a plow so this christmas I bought her one, I can't fit it under the Christmas tree so I am going to slip it under the bronco, The blade has a number on it of 4300219, the pump has a serial number of B1178920
    from what I goy It looks like I may have every nut and bolt , I just want to do it correctly


    Can anyone direct me to the info I need, Merry Christmas!
     
  2. Showmestaterida

    Showmestaterida Senior Member
    Messages: 407

    Westerns websight is very helpful. look it up in the publication library.
     
  3. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    Captbo;
    Here are diagrams of two mounts plus the pdf. Pdf have all the information you need to put is together. even the wiring. U just have to choose which one is your truck mount..Look at the "top right" corner of each diagram and it will tell what year the mount fits. These are both unimounts..

    This is what I found Diagram A 92-93 bronco F

    ford92.jpg

    Here is the link for the PDF
    http://www.westernplows.com/pdfs/13606_010297.pdf

    Diagram B 80-91 bronco F (just in case)

    ford92A.jpg

    Here is the link for the PDF
    http://www.westernplows.com/pdfs/13598_020197.pdf

    ford92.jpg

    ford92A.jpg
     
  4. captbo

    captbo Senior Member
    Messages: 112

    Thanks you both very much, for some crazy reason I could not see the dates of the model types,, sux getting old !, Merry Christmas, let it snow!
     
  5. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    u figure out which one it is???
     
  6. captbo

    captbo Senior Member
    Messages: 112

    I have to getter a better look at it tonight when I get home, I just picked it up last night and ut was dark when I left this am. I will post up when I confirm.. Again thanks
     
  7. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    maybe some pictures.....

    Have a good one
     
  8. captbo

    captbo Senior Member
    Messages: 112

    Twinman326, It appears to be the top one the model 1265. and after closer look at the link you sent me I will need a controler, and perhaps a few other elec items, what I know I have is the two pin plug and one with about nine pins then a host of wires that look like headlike connection, and a block with about six what appear to be relays?

    Again thanks for your help!
     
  9. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    hope that it is the top one. the other one is a royal pain. the top one is a pain also. but not as bad. your truck should have 2 relays. i'm sure twinman can pull the diagram from western for your wiring. that should tell you what harness is needed.
     
  10. captbo

    captbo Senior Member
    Messages: 112

    Thanks No lead , I hope to take some detailed pictures, is that a spay rod as your avatar?
     
  11. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

  12. captbo

    captbo Senior Member
    Messages: 112

    Well thanks again, I wrestled through the snake den of wires, and I have the two pin power wire and the 22" red wire I have what appears to be the light harness, and a block of about six relays, here are the pictures, I hope?

    DSC_0001.JPG

    DSC_0002.jpg

    DSC_0003.jpg

    DSC_0004.jpg
     
  13. captbo

    captbo Senior Member
    Messages: 112

    I do not see anywhere were the large power wires connect as show am I missing, the selinoid?
     
  14. captbo

    captbo Senior Member
    Messages: 112

    here is the bolt on iron

    the one peice is leaning up on an S-10 chassis

    DSC_0007.jpg

    DSC_0010.jpg

    DSC_0011.jpg

    DSC_0012.jpg
     
  15. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    there is a tag on the head light harness/ 6 relays....could you read the numbers off of it?? That will help out a lot??? That is a uni steel pro plow..If you use a tape measurer measure the blade..Can't tell if it a 7.5 or and 8"0

    Also if there should be another harness that has "pins" inside (the one that attach to the plow light, Svalves and motor. Look inside and count the pine..Either there will be 9 or 12 metal pins???
     
    Last edited: Dec 23, 2009
  16. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    here is the electrical schematic for the 6 relay

    9har.jpg

    not sure if it for your year vehicle

    9har.jpg
     
  17. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    First pic, can't really see the whole frame
     
  18. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    This is what I found for your year veh..What type of "F" series??

    ff.jpg

    FhA.jpg

    Here is the PDF

    ff.jpg

    FhA.jpg
     
  19. captbo

    captbo Senior Member
    Messages: 112

    Its a nine ( 9) pin plug,
    Large white tag has a number on it of 26071 big numbers,
    then the small reads rev'#2
    09/00 (Could this be a date?)
    67765
    Fargo assemblyof p.a.

    Blade is 8'

    Thanks for all your kind help, I will take better picture Thur,
    Merry Christmas,, Bo
     
    Last edited: Dec 23, 2009
  20. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    That harness number came up for a 1999 + chevy/gmc vehicle. Hb3/Hb4 vehicle head lights...

    I believe you have Hb-5 lights

    Your going to need

    Fadp.jpg

    fadpt.jpg

    plug in harness HB-5== $47.52 ( #61591)
    link
    http://www.equipmentspecialistsinc.com/ccp51/item--PLUG-IN-HARNESS-HB-5-A--61591.html

    vehicle harness kit 9 pin (#61437) == $145.11
    link
    http://www.equipmentspecialistsinc.com/ccp51/item--Vehicle-Harness-9-Pin-(SB)-61437--61437.html

    snow plow harness 9 pin #61438== $108.73
    link
    http://www.equipmentspecialistsinc.com/ccp51/item--Snowplow-Harness-9-Pin-(SB)-61438--61438.html

    vehicle power cable #61169== $39.61
    link
    http://www.equipmentspecialistsinc....y-Cable-(All-other-systems)-61169--61169.html

    snow plow battery cable #21294== $39.41
    link
    http://www.equipmentspecialistsinc....ry-Cade-(All-other-systems)-21294--21294.html

    SPDT relays (need 2) #61535 ==$12.27 each (you can probable use the relays you have ) (6)
    link
    http://www.equipmentspecialistsinc.com/ccp51/item--SPDT-Relay-61535K--61535K.html

    Motor relay (solenoid) #56131== $11.71
    link
    http://www.equipmentspecialistsinc.com/ccp51/item--1-Motor-Relay-56131K-1--56131K-1.html

    I know I already gave you the part numbers, here they are again..

    Fadp.jpg

    fadpt.jpg
     
    Last edited: Dec 23, 2009