1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Brake problem

Discussion in 'Ford Trucks' started by redplowman, Feb 15, 2009.

  1. redplowman

    redplowman Member
    Messages: 61

    Hello everyone,

    I just replaced the upper and lower ball joints and did the brakes all the way around on my 2006 F-350 Super Duty 4x4. I did have to replace one rear caliper which I did and bled out. The rest of the job went pretty well but now my brake pedal does not hold. I can pump up the brakes but the next time I apply them the pedal goes low again. I did go back and bleed all 4 starting at the furthest from the master. I'm not that famillier with these new anti-lock systems can someone help. Thanks for the anticipated responses.

    Redplowman
     
  2. CityGuy

    CityGuy PlowSite Fanatic
    Messages: 16,993

    I'm not too familiar with the ford but had a similar problem with my chey. The rubber piece in the master was not seated correctly. Might check that.