1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Box Plow dented and warped

Discussion in 'Truck & Equipment Repair' started by natureboy, Dec 23, 2008.

  1. natureboy

    natureboy Junior Member
    Messages: 29

    Hoping for some ideas. Got a 10ft pusher, 1 of the side walls got bent inwards on a curb but the bigger issue is the cutting edge now doesnt sit flush and it leaves an inch of snow behind rendering it useless. I was gonna try to smack it on a curb in the opposite direction a couple times to see if i can straighten the wall and hopefully the cutting edge automatically goes back to where it should be. Any other ideas would be greatly appreciated.
     
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    you may try to push it back, but be carefull. don.t push to much. leaving one inch on one side isn't useless when you have more than 20 inches.