1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Both sets of Headlights stay on, Why ???

Discussion in 'Boss Plows Discussion' started by Eyesell, Nov 24, 2007.

  1. Eyesell

    Eyesell 2000 Club Member
    Messages: 2,101

    Hooked the plow up this year and noticed when I turn on my lights my truck lights and plow lights are on at the same time. I move the switch from truck to plow and still nothing, I even checked to see how it was pluged in ( the switch ) and it', all wires where they should be.

    Any suggestions ???

    Worked fine last year, I hate electrical problems :angry:
     
  2. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    I think there's a relay and could be rusted.
     
  3. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Could also be the switch. Get a test light and start looking. And, yes....electrial problems can be a nightmare.
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Does it only do it on one beam, or will it still light all 4 on both high and low?
     
  5. Eyesell

    Eyesell 2000 Club Member
    Messages: 2,101


    Good question, so far I just tried low beam, will try tomorrow.

    What I've really being doing since I took my plow back to storage is turing on the headlights and moving the switch, when it worked properly it would toggle the lights on/off, now they just stay on.