1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss Solenoid

Discussion in 'Boss Plows Discussion' started by Sierrabarry, Nov 3, 2009.

  1. Sierrabarry

    Sierrabarry Junior Member
    Messages: 23

    I just picked up a new Boss solenoid to replace one that was new in 2003. The new solenoid is completely different and there are no directions. I looked at the schematic and it appears that as long as I put the power wires on the big terminals and the small wires on the small terminals everything will work. Is this a safe assumption?
     
  2. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    You are correct. It doesn't matter either way. aslong as the big wires go on the big terminals and the little ones go on the little terminals.
     
  3. Sierrabarry

    Sierrabarry Junior Member
    Messages: 23

    Cool. Thanks!