1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss plow lights won't work.

Discussion in 'Truck & Equipment Repair' started by Chuck Errett, Jan 2, 2016.

  1. Chuck Errett

    Chuck Errett Junior Member
    Messages: 2

    I have a 2002 Chevy 2500hd with a 13 pin harness with 4 relays. My 8.6 plow has 11 pins.Everything works except the headlights. I have double checked the wire orientation and connections. The plow worked fine on my 87 which also had 13 pin w/o the relays. Any ideas?
     
    Last edited: Jan 2, 2016
  2. AEI

    AEI Member
    Messages: 56

    If its wired right.. sounds like a relay issue. If it's just regular relays (which I assume it would be) when the light switch is on pin 87 should have 12V. Check the bulbs, Check for corrosion or Hard wire the ***** since it worked on your 87 and call it a day!

    I know I said "if it was wired right" My 02....Triple check the grounds. Run a new Jumper as a ground if in doubt.
     
    Last edited: Jan 8, 2016