1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss help tonight.

Discussion in 'Commercial Snow Removal' started by ford6.9, Jan 11, 2009.

  1. ford6.9

    ford6.9 Senior Member
    Messages: 452

    Please if anyone could give me a hand on how to hook up the springs on a 9.2 boss V plow. Any tips I am talking about the 4 trip springs that hook to to the blade
  2. Green Grass

    Green Grass PlowSite Fanatic
    Messages: 9,568

    are they the trip springs in the middle of the V
  3. ford6.9

    ford6.9 Senior Member
    Messages: 452

    yes they are. It seems as if i cant use the bolts to tighten them up because they aren't long enough is there something i am missing?
  4. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    did you put the lift cylinder all the way down first? loosen the tensioner with a wrench. looks like a chain binder.
  5. ford6.9

    ford6.9 Senior Member
    Messages: 452

    Go it. This thread can be removed. thanks for replying.
  6. ford6.9

    ford6.9 Senior Member
    Messages: 452

    had to put it down all the way and we used another plow to hold the blade up then just re threaded the bolts on the back. simple but was rushing it at first not thinking straight.