1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss cutting edge question

Discussion in 'Boss Plows Discussion' started by xtreem3d, Dec 28, 2007.

  1. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    i have a 9 foot straight blade plow for a skid steer that came w a cutting edge that i bolted to the trip edge but the cutting edge only extends past the trip edge by about 1/2 inch.as soon as the 1/2 inch is gone i'll be grinding into my trip edge, could they have given me the wrong cutting edge? this doesn't seem right
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If it's a 6" top punch edge (p/n STB03242) then it's the correct one...

    The Boss TE's are just like the Fishers, you need to wear the base angle down some before you install the cutting edge.
     
  3. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    thanks b&b didn't know that ..this is the first trip edge plow we have used.still seems like after the tripe edge is worn in we won't get alot of use from the cutting edge( like you would on say a meyers)