1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss 9'2" vee Light issues.

Discussion in 'Boss Plows Discussion' started by Jon Geer, Nov 30, 2005.

  1. Jon Geer

    Jon Geer Member
    Messages: 834

    Please help. I have a 1999 Dodge 1500 Sport with a Boss 9'2" on the front and a SwingWing on the back. Well the plow lights stopped working. I have done all the diagnostics that I can, and come up with nothing. I tested continuity, I ran ground wires from the battery to lights, I've run power from the Battery to the lights, I've checked the grounds on the relays, I've replaced the bulbs, relay, fuses, switch, and still nothing.

    Why can't all plow manufatures be like SnoWay?

    I need HELP !!!!!!

    Thanks guys.

    Oh, they are the newest lights with the two post mount.
     
  2. Ron's Lawncare

    Ron's Lawncare Junior Member
    Messages: 24

    WOW that's a lot of plow for a 1/2 ton pickup...



    Ron
     
  3. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 8,468


    :rolleyes: Gee I don't know your signature says your the guru!!:waving:
     
  4. 04superduty

    04superduty PlowSite.com Addict
    Messages: 1,354

    do the truck lights work, or are both the truck light and plow lights out. it does sound like you
    should go wide get a blizzard lol that was funny. sorry jon just had to do it. :)
     
  5. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Did you check the toggle switch?
     
  6. LwnmwrMan22

    LwnmwrMan22 PlowSite Fanatic
    Messages: 27,974

    That's what happens when you're running a Boss and you're the BLIZZARD GURU
     
  7. Eyesell

    Eyesell 2000 Club Member
    Messages: 2,101

    Good one, I'd be changing my signature as of right now :nod: :dizzy:
     
  8. Jon Geer

    Jon Geer Member
    Messages: 834

    Thanks for all the help guys. It was a poor pin molded in the main harness, replaced the harness and it's all set. Thanks for all the diagnostic help. Another great colaboration of minds to solve an issue.:waving: