1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss 8'2" Pump

Discussion in 'Boss Plows Discussion' started by DStrabb, Oct 6, 2011.

  1. DStrabb

    DStrabb Member
    from MI
    Messages: 36

    Hey guys was screwing around with the plow on a rainday last week and found that my hydro pump is not mounted to anything under the black plastic cover. I do not even see how it is supposed to be mounted. Any insight on how it is supposed to be mounted?
     
  2. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    If you look at the back of the pump housing there should be a spot for 2 bolts to that bolt the pump to the housing. The holes will be next to the flow control on the back of the housing.
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Two bolts through the rear of the light tower and two more on the underside with all four threading into the aluminum pump block. Take a look and you'll see the holes in the tower.
     
  4. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Whoops, forgot about the ones in the bottom. Thanks B&B.