1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Bobcat and 03 8.5C

Discussion in 'Meyer / Diamond Products Discussion' started by LandscapeSteve, Oct 17, 2009.

  1. LandscapeSteve

    LandscapeSteve Junior Member
    Messages: 3

    I want to make a quick-tach mount for my 763 Bobcat to mount a used 8.5C Meyer to. The Bobcat aux psi is about 2500psi. Can I connect the angle cylinders directly to the aux ports (with a few connectors and adaptors)? Do I need to worry about the high psi blowing the angle cylinders apart?
     
  2. dlcs

    dlcs 2000 Club Member
    Messages: 2,149

    Install regulators/valves to reduce pressure.
     
  3. Bruce'sEx

    Bruce'sEx Senior Member
    Messages: 873

    regulator and bypass are a requirment, or you will be whipping back and forth on angle hard on the blade. With no bypass you'll do some damage if you hit something hard.