1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

blower motor issue

Discussion in 'Ford Trucks' started by Morrissey snow removal, Nov 22, 2010.

  1. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    the fan on my 95 f350 only works on high but the blower has power in all positions do u think its the switch or the blower motor??? thanks for the help
     
  2. grec-o-face

    grec-o-face Senior Member
    Messages: 485

    Blower Motor Resistor is most likely. They fail alot! And much cheaper than the whole blower motor.
     
  3. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    all 3 trucks are doing it now i just took one of the resistors out and the plug pins on it were rotted into the plug
     
  4. linckeil

    linckeil PlowSite.com Addict
    from CT
    Messages: 1,265

    very common. its happened to all but one of the OBS's that i've owned.
     
  5. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    all 3 were the resistors and the pigtail all fixed
     
  6. grec-o-face

    grec-o-face Senior Member
    Messages: 485

    Glad to hear everything worked out!
     
  7. affekonig

    affekonig Senior Member
    Messages: 909

    Huge pain for how easy it should be... Two screws, one connector, but the corrosion glues them together every time.
     
  8. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    yes it does sucks but i like to have the varible speed its nice! thanks guys
     
  9. accu-cut lawn

    accu-cut lawn Junior Member
    Messages: 13

    Resistor is bad.
     
  10. daninline

    daninline Senior Member
    Messages: 430

    I had this problem also but it was the blower motor it was just worn out, if I pressed on the connector on the motor it would make the brushes make better contact, so I tossed the motor and everything is much better...