1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Blizzard Wide Out Plow ?

Discussion in 'Blizzard Plows Discussion' started by greentech2007, Feb 1, 2014.

  1. greentech2007

    greentech2007 Junior Member
    Messages: 3

    Has anyone ever put the poly cutting bar on the wings from a western wide out plow on a blizzard wide out plow instead of the steel cutting bar.
     
  2. jbutch83

    jbutch83 Senior Member
    Messages: 227

    Don't know if they will fit. You can get poly edges did the blizzard, they also make a poly edge for the main blade as well.
     
  3. greentech2007

    greentech2007 Junior Member
    Messages: 3

    OK thanks do you know where you ve got or can get them.
     
  4. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Why would you want to?
     
  5. jbutch83

    jbutch83 Senior Member
    Messages: 227

    Try blizzard dealer. They will save some damage to the wings in certain situations.
     
  6. greentech2007

    greentech2007 Junior Member
    Messages: 3

    OK ya just thought would be easier on equip. and curbs. Going to blizzard dealer tomorrow see what they have.Thanks to you all who responded.
     
  7. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,853

    Just a few clarifications:

    Blizzard does not have a WideOut. Blizzard is the original and it is a PowerPlow.

    Bars are square steel. You are referring to the cutting or scraper edge.

    Using the proper terminology will make it a lot easier for you in the long run.

    Like John said, you can get poly wings, poly main edge or a combination of the 2. I run poly wings and steel main edges. Works great.
     
  8. Cooter24

    Cooter24 Senior Member
    from NE Iowa
    Messages: 268

    Where are you getting the poly wing edges? We would like to try a set when we replace our next cutting edges. Thanks.
     
  9. jbutch83

    jbutch83 Senior Member
    Messages: 227

    Blizzard dealer or try Jerre Heyer, he used to have some as well.