1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Blizzard SS810 $1,400

Discussion in 'Used Plowing and Truck Equipment Forum' started by JD PLOWER, Nov 8, 2009.

  1. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Blizzard SS810 for a skid steer. Plow was purchased new about 7 years ago and used for about one winter. The bobcat it was mounted to became a primary salt loading machine and we kept the plow in the hopes that we would one day purchase another skid for plowing. We didn't, so the plow has sat unused other than about 25-30 hours of use that first winter.

    Plow was functional when removed from skid about 5 years ago, however two years ago we tried to operate this plow and it failed to work. Our dealer told us it was most likely the machine side of the wiring harness that was causing the problems. So currently it does not work due to us not having a replacement for the skid side of the harness, it can't be activated. Everything about the integrity of the plow is fine, the edges are almost new as are the pistons, it was stored inside for a few years but has been outside the last few so surface rust on the back of the plow is prevalent. I will take pictures tomorrow and post asap. It is being sold as is where is and can be placed in the back of a truck with our backhoe.

    Price is cash only no checks of any kind. Located in Somerville MA.

    The pictures below are from about 7 years ago.

    PM questions please.

    Picture 097.jpg

    Picture 092.jpg

    Picture 090.jpg
     
  2. fireboy6413

    fireboy6413 Senior Member
    Messages: 396

    can yo get some current pics
     
  3. Pennings Garden

    Pennings Garden Senior Member
    from VA
    Messages: 242

    Does it have the older 14 or 15 prong plug or the new 7 or 8 prong plug? this is a power plow right? with the scoop wings?

    If I can sell my 10' ffc plow soon I might be interested.
    PM me a number and I'll call you over the next few days.
     
  4. threeleaf

    threeleaf Senior Member
    Messages: 227

    im me your number im very interested
    or give me a call at 860 209 3844
     
  5. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Check the front of the plow.

    More pics asap, as stated above.
     
  6. Pennings Garden

    Pennings Garden Senior Member
    from VA
    Messages: 242

    meaning is this hooked up to still work or is this a home made power angle with a blizzard blade??

    A simple yes or no would have been great...?

    If original what electric hook up?
     
  7. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Does it look homemade?
     
  8. jglandscaping

    jglandscaping Senior Member
    Messages: 271

    Am I the only one to understand the complete Listing?
    Will the plow include the wire harness off of the bobcat?
    I am very interested in the plow, setting up a New Holland 4030 currently and think it would match the Ebling Blade I'm ordering nicely...
    Im located in Southern NH...PM me when you get pics up

    James
     
  9. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    If you want the old harness I will remove it from the bobcat. I will photograph the harness as well.
     
  10. MIDTOWNPC

    MIDTOWNPC PlowSite Veteran
    Messages: 4,452

    I am interested but dont understand the controlls. I have aux hydros on the front of my s300, my current blade which I made has 2 hydro plugs, left and right, now do you expand the plow with this hookup you have. or is there a seperate controller?
     
  11. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

  12. lawnkale

    lawnkale Senior Member
    from Indiana
    Messages: 156

  13. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Some up to date photos taken today. All questions will be answered on PM.
    The wiring connections (male/female) are not original it will have both the bobcat side and plow side with it when sold. I don't have any pictures of the control itself but it will go with the plow. Please remember this is sold as is, so you know some work will be needed to make it functional again. I removed the cover to the hydro's but I do have it and it's fine.

    blizzards 09 002.jpg

    blizzards 09 003.jpg

    blizzards 09 004.jpg

    blizzards 09 005.jpg

    blizzards 09 007.jpg
     
    Last edited: Nov 9, 2009
  14. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    More photos...

    blizzards 09 008.jpg

    blizzards 09 009.jpg

    blizzards 09 010.jpg
     
  15. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    I sent ya a PM this morning. Curious if you got it?
     
  16. lawnkale

    lawnkale Senior Member
    from Indiana
    Messages: 156

    i'm interested can you email me or call. I would like to make arrangements if you still have it.

    219-4069615

    kale@ground-specialist.com
     
  17. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Folks please use PM. I will get back to you as fast as I can most likely within 6-8 hours.
     
  18. JD PLOWER

    JD PLOWER PlowSite.com Veteran
    Messages: 751

    Bump this since potential deal fell through.
     
  19. threeleaf

    threeleaf Senior Member
    Messages: 227

    give me a call im very interested
    Allen 860 209 3844
    imed you also
     
  20. Pennings Garden

    Pennings Garden Senior Member
    from VA
    Messages: 242

    Seeing you did such a professional job on the enclosure of the bobcat it was on and the fact there was not a good picture of the mount at that time one might think so...

    But it's all good we all know now that it's a complete skid steer mount with the controls and all...

    free bump for ya any way...