1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Bent MM2 **Must See**

Discussion in 'Fisher Engineering Discussion' started by fordtruck661, Feb 6, 2014.

  1. fordtruck661

    fordtruck661 Senior Member
    from CT
    Messages: 404

    So I was reading through Facebook and find these pictures.

    The person says that he did not even notice until someone pointed it out to him. :eek:

    1891046_10152246641715844_1369641365_n.jpg

    1798571_10152246661910844_1924398244_n.jpg

    1619141_10152246701985844_1492687536_n.jpg
     
  2. GVL LLC

    GVL LLC Senior Member
    Messages: 121

    wtf did he hit? How do you not even notice that smh
     
  3. John_DeereGreen

    John_DeereGreen PlowSite.com Addict
    Messages: 1,898

    I'd think the hole in the windshield from his forehead would be some indication to check the plow for damage...

    On another note, speaks a little good about the strength of GM and Fisher frames...
     
  4. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,243

    wow that's a hard hit on the corners
     
  5. peteo1

    peteo1 PlowSite.com Addict
    Messages: 1,660

    Hope he has a good dentist. Probably needed one to pull his teeth out of the steering wheel:eek:
     
  6. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Judging by whats left of the cutting edge, maintenance and care for the equipment was not high on the list for this jockey.
     
  7. M&M

    M&M Senior Member
    Messages: 312

    Something happened with the trip edge. Look closely and you can see the cutting edge is straight. The mold board above it separated from the trip edge/base angle and it pushed forward. It just looks like the sides of the plow bent back but in reality the middle pushed forward.
     
  8. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,669

    Looks like he was hitting the piles a bit too hard.
     
  9. fordtruck661

    fordtruck661 Senior Member
    from CT
    Messages: 404

    Per the person that posted it.

    This is at a dealership. It was traded in and now being used to plow the parking lot. Truck will be going to wholesale soon.
     
  10. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    One of my blades used to look like that. Hit a rock just right and buckled the whole left side of the moldboard.
     
  11. alldayrj

    alldayrj PlowSite.com Addict
    Messages: 1,096

    Perfect example of why full trip is better than trip edge. Ready... Go
     
  12. ScubaSteve728

    ScubaSteve728 Senior Member
    Messages: 477

    [​IMG]
    how bout this
     
  13. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    ouch! What did it hit?
     
  14. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    The V was probably in an accident...just sayin
     
  15. bcramblit

    bcramblit Member
    Messages: 35

    Yeah... But, the Boss guys are like, Fisher sucks!!!
     
  16. bcramblit

    bcramblit Member
    Messages: 35

    He had to of it a curb head on and square for the edge to be straight and to separate the base plate from the plow. Nobody told him he had lift over a curb.:nod: