1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Bent headgear Q

Discussion in 'Fisher Engineering Discussion' started by mikespenny, Feb 4, 2014.

  1. mikespenny

    mikespenny Junior Member
    Messages: 22

    Just purchased a barely used MM1 HD with the insta actpump from a guy who had the jack drop, bent the hell out of it, scared the crap out of hisself, and promptly stopped plowing.
    Anywho, the jack leg kicked back and bent the rear headgear support, which in turn tweaked the adjustment pin holes, binding the pins, and preventing me from dropping it down to the hole i need it in.
    Does anyone have any tricks on how to "unbend" this piece, besides heat and a BFH?
     
  2. TJS

    TJS PlowSite.com Addict
    Messages: 1,339

    Post some pics.
     
  3. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

    Replace the leg is what I would do