1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Belt driven Diamond plow anglng problem

Discussion in 'Commercial Snow Removal' started by Don J, Oct 16, 2004.

  1. Don J

    Don J Junior Member
    Messages: 1

    Hi. i have an older pulley/hydraulic system with a Diamond plow. i can raise and lower the plow blade, but cannot angle it either way.i disconnected the hydraulic lines at each cylinder and moving the control lever in each direction got plenty of oil pressure. Could i have a frozen cylinder? There is no leakage at the cylinder. Worked ok last winter. sat through the summer. Thanks for any help
  2. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,815

    did you flush out the sytem check the filters sometimes i see guys pushing the blade up aganist a pole or some silcone spray works to