1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

"Basically New" Snow Dogg VX95 For Sale $3500.00- Leesburg, VA

Discussion in 'Used Plowing and Truck Equipment Forum' started by RiverCreek, Oct 11, 2010.

Tags:
Thread Status:
Not open for further replies.
  1. RiverCreek

    RiverCreek Junior Member
    Messages: 1

    Snow Dogg VX95 for sale. Purchased new in February 2010. Here's the story - as brief as I can make it.. I had a truck go down just before the second BIG snow we had here in Northern VA. I ended up buying a truck and a plow the day before the storm hit - no time to repair other truck. Ordered a 9 1/2' plow and dropped off truck for install. Arrived to pick up truck with 6" of snow on the ground and blowing sideways to find an 8 1/2' plow installed on my truck. I'll fast forward through expletives. By the time I got the spreader on the truck and wired, the storm was over. I did use the plow for a day and a half once I finally got everything together, completed VDOT inspection, repaired broken trans lines on new truck, etc. A month or two later I did call the company that sold me the plow and after many more expetives (fast forward), did eventually get the 9 1/2' wings I originally ordered and paid for. Haven't used plow since - these wings have never hit the ground. Bought a bigger truck this year and hence need a bigger plow, thus I am selling this one as "Basically New". Probably would be easier to sell as new, but I gotta be frank in saying it's not technically new. Any case, complete wiring harness/controller included. I also have a semi-butchered lower rack for this plow that bolts to a 95 F-350. Semi-butchery by installer, not me. Need $3,500.00 for entire unit. Crappy picture attached - I'll try and post a better one. I can be reached directly @ 571-436-4120 with any questions you might have. I am located in Leesburg, VA.
     
  2. Jim@esitrucks

    Jim@esitrucks Inactive
    Messages: 1,124

    Pics not working man. I have seen this plow, what he says is correct, the plow is in great shape
     
  3. RiverCreek

    RiverCreek Junior Member
    Messages: 1

    Pictures - Attempt #2

    Ok, hopefully pictures will post properly this time. Thanks Jim for the verification and telling me about the pictures. Just for the record - it WAS NOT Equipment Specialists who I purchased the plow from.

    Snow Dogg Plow 002.jpg

    Snow Dogg Plow 001.jpg
     
  4. JohnstonAG

    JohnstonAG Junior Member
    Messages: 0

    Can this mount to a 2002 F350 DRW 7.3l?
     
  5. RiverCreek

    RiverCreek Junior Member
    Messages: 1

    I can't say for sure, but I doubt it. It's unlikely to be a direct bolt up. You probably would not need much if any additional metal, but as it is, it will most likely require some (cutting/welding) modification.
     
  6. guff1972

    guff1972 Junior Member
    from kansas
    Messages: 21

    Any Idea if a 2500 hd gmc could handle the weight of this unit and what a mount might cost.
     
  7. RiverCreek

    RiverCreek Junior Member
    Messages: 1

    I don't know, you can go on the snow dogg site and type in your year, make, model, engine, etc. and it should tell you if it's compatible. It's a pretty heavy plow for a 3/4 ton in my opinion, unless you've had suspension work done.
     
  8. pasto_guy

    pasto_guy Member
    Messages: 48

    What make and model is this plow set up for?
     
  9. RiverCreek

    RiverCreek Junior Member
    Messages: 1

    95 Ford F-350
     
  10. JohnstonAG

    JohnstonAG Junior Member
    Messages: 0

    So which part is butchered the Lift Frame, or the Truck Mount?
     
  11. Michael J. Donovan

    Michael J. Donovan Head Moderator, Online Communities Staff Member
    Messages: 1,051

    item has been sold
     
Thread Status:
Not open for further replies.