1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Back Drag Blade for Fisher HD 8 ft plow

Discussion in 'Fisher Engineering Discussion' started by tonylillo, Aug 18, 2015.

  1. tonylillo

    tonylillo Senior Member
    Messages: 115

    I have been searching for many years to find a back drag blade for an 8ft and 7.5 ft HD MM2 plows. I think it has to be fabricated from scratch, looking for anyone in NJ/NY/PA area that can do this fabrication.
     
  2. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    I have one made that I will sell. PM for more info.
     
  3. tonylillo

    tonylillo Senior Member
    Messages: 115

    where are you located?
     
  4. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Im a couple hours away in CT
     
  5. karimdurham

    karimdurham Member
    Messages: 31

    Where are you located with the back blade, if not sold already?
     
  6. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    06611 Trumbull
     
  7. tonylillo

    tonylillo Senior Member
    Messages: 115

    Is this back drag blade still available in Connecticut?
     
  8. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Still available. What plow do you have? Its off an 8' MM1 but can be adapted to fit others.
     
  9. Ridmax

    Ridmax Junior Member
    from 02818
    Messages: 8

    would be interested too if not already sold. Have mm2. Where are you located in ct? What are you looking to get for it?
     
  10. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    Can do $150 on the backdrag. Trumbull 06611
     
  11. tonylillo

    tonylillo Senior Member
    Messages: 115

    Do u install also? R all the cuts already made?
     
  12. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    No on the install. Made some cuts for the MM1, not sure how it will line up with a MM2 but an easy adjustment for someone who fabs steel.
     
  13. tonylillo

    tonylillo Senior Member
    Messages: 115

    Another season coming and I am still looking for a backdrag blade for fisher 7.5 HD plow
     
  14. Mitragorz

    Mitragorz Senior Member
    Messages: 181

    If you don't mind driving to MA, these are the guys that did mine: http://welding-ma.com/plow-repair/

    Had the plow in the bed of my pickup, drove up, and they installed it then and there. This will be the fourth season, no problems at all and still works great.
     
  15. tonylillo

    tonylillo Senior Member
    Messages: 115

    They must be out of business, I called 3 times and left a message with no call back
     
  16. Mitragorz

    Mitragorz Senior Member
    Messages: 181

    Too bad, I planned on using them again.