1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Awful noise when raising a 2010 HD

Discussion in 'Fisher Engineering Discussion' started by MatthewG, Nov 27, 2010.

  1. MatthewG

    MatthewG PlowSite.com Addict
    Messages: 1,390

    I have a 2010 8'6 HD and when I raise the plow I hear an awful noise of metal rubbing grinding. I believe it is from the 3 pins that connect the triangle to the light tower and the lift cylinder to the triangle.

    At first i thought it was the spring, but i removed that it wasn't the problem

    Any thoughts

    photo (2).jpg
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Disconnect the pins and grease them up, re install and see if it cures it. I've also found cotter pins bent in a manner that they will rub against the underneath of the lift arm causing a scrapping noise.

    The noise could also be coming from where the A frame connects to the headgear.