1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Anyone w/Pics of ProFlo2 Underbed frame Mount?

Discussion in 'Ice Management' started by millsaps118, Jan 16, 2010.

  1. millsaps118

    millsaps118 Senior Member
    Messages: 694

    I will be picking up a ProFlo2 tomorrow and was deciding if I should buy the factory underbed frame mount or just fab one up. I searched online for the mount and can't find any good images of how the mount bolts up.

    Anyone care to post some pics????
     
  2. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    Have a few pics here for a mount off a 96 f250 that included a class 4 hitch. send me your email and I"ll send them to you. Also have a drawing with measurements, fairly simple to build using 3/8 plate.
     
  3. millsaps118

    millsaps118 Senior Member
    Messages: 694

    kkhd2500@hotmail.com
     
  4. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,594

    Could you send me those specs also? Thanks rtangler@sbcglobal.net
     
  5. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    Sent your pics tonight,
     
  6. millsaps118

    millsaps118 Senior Member
    Messages: 694

    I never got mine..............
     
  7. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,594

    me too also...
     
  8. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    Sorry forgot to open outlook in order to send, it was stuck in the out box
     
  9. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    delivery to your hotmail failed. Is this the correct address or could be file to big for hotmail. Do you have another account to send to?
     
  10. millsaps118

    millsaps118 Senior Member
    Messages: 694

    that's the right email. try it again, my hotmail account acts up every now and then........
     
  11. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    ok, sent again, going out for dinner, if it doesn't work i'll upload to this sight later
     
  12. millsaps118

    millsaps118 Senior Member
    Messages: 694

    Still didn't get it, can u just upload here?
     
  13. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    Here are some

    DSC01208.jpg

    DSC01209.jpg

    DSC01213.jpg

    DSC01211.jpg

    PICT0012.JPG
     
  14. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    have to run, daughter has a cup game tonight
     
  15. millsaps118

    millsaps118 Senior Member
    Messages: 694

    :drinkup:Thanks!!!!!!!
     
  16. hitachiman 200

    hitachiman 200 Senior Member
    Messages: 262

    Use photo above the drawn plan as a reference . The rear plate with the three holes and the half circle out of the top bolts to the frame rails just like a trailer hitch does. The two middle pics show where the cross tube that holds the receiver would slide into the square tubes welded to the sides of the salter mount pockets. They did this on the factory mount to make it a universal fit. We moved this unit from the ford to a gmc so I just cut the half circle out of the top to fit around the stock gmc hitch. Any questions just ask. Our unit has been running for 6 yrs now and about 50 or 60 pallets of salt plus bulk with no issues just keep her greased and FF. :)



    Good Luck with your project,

    Jon Bevan