1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Any Info On This

Discussion in 'Ice Management' started by RSK, Dec 2, 2005.

  1. RSK

    RSK Senior Member
    Messages: 236

    Do any one know how to make a vibrator for a salt spreader?
    Any info will help? or do any have any pic.
    thank's :waving:
  2. little pat

    little pat Member
    Messages: 83

    Karrier makes vibrators used by most of the spreader mfgs. I installed one on a Snowex and it helped immensly when using bulk material.
  3. nevrnf

    nevrnf Senior Member
    Messages: 456

    Make your own. Here is a reasonaly priced part. Just bolt it to the Hopper with LARGE flat washers and adda toggle switch and a relay at the battery with a properly sized cable to the motor.