1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Another touch pad question

Discussion in 'Meyer / Diamond Products Discussion' started by jrodgers, Jan 30, 2012.

  1. jrodgers

    jrodgers Senior Member
    Messages: 156

    So I have a touch pad plow that I used for the first time this season and when I first hooked it up I got the red light. Messed with it a little (just jiggled a few things and turned it on and off a few times) and got it to work. It later did the same thing and I messed with it again and it worked. Does this sound like the touch pad or wiring somewhere?
  2. kashman

    kashman PlowSite.com Addict
    Messages: 1,070

    coil wires clean them they need 2 be 100% clean meyer is a stickler for this
  3. Boomer123

    Boomer123 Senior Member
    Messages: 334

    My problem with the touch pad was the wires at the end of touch pad. I had to pull and straighten them every so often or it would stop working.
  4. wva

    wva Member
    Messages: 78

    make sure it has a good ground
  5. jrodgers

    jrodgers Senior Member
    Messages: 156

    Thanks for the responses.....