1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

another hand held controller question

Discussion in 'Western Plows Discussion' started by Scenic Lawnscape, Mar 6, 2009.

  1. Scenic Lawnscape

    Scenic Lawnscape Senior Member
    Messages: 481

    I figured out my issue and it is there is a loose connection in the male/female connector, so can I just hard wire the controller to the harness and then i will just have the controller in the truck all the time?

    If not can you buy just those connectors?
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Sure you can just hardwire it. Or you can cut the old plugs off and replace them both with any kind of connector plug of your choice. Most any 6 pin plug will do the job.
     
  3. Scenic Lawnscape

    Scenic Lawnscape Senior Member
    Messages: 481

    thanks again for your help