1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Angle valve for older Power V

Discussion in 'Boss Plows Discussion' started by D_EDGE, Dec 17, 2012.

  1. D_EDGE

    D_EDGE Junior Member
    from Alaska
    Messages: 3

    I've got a 91 power v with a bad angle valve that lets the right wing drift back. I was wondering where i can find a valve for the older valve body. Apparently when they went to the plow without chain lift they changed threads on the valve body even though its essentially the same valve or so I've been told? Anybody know where I can find the older valve with the correct threading? Thanks.
     
  2. SnoForce

    SnoForce Junior Member
    Messages: 27

    I have a used one if your still looking. John 443-336-9987
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    What is the p/n on the manifold?
     
  4. SnoForce

    SnoForce Junior Member
    Messages: 27

    HF880320 is stamped into valve.
     
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Look for a p/n on the manifold. Need to identify it first.