1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

angle stopped working

Discussion in 'Meyer / Diamond Products Discussion' started by rmarksb, Feb 16, 2007.

  1. rmarksb

    rmarksb Junior Member
    Messages: 24

    hello , last night the right angle stopped working , it turns left fine, everything else is fine, i checked all connections , any ideas? thanks
     
  2. sefh

    sefh Senior Member
    Messages: 436

    Replace your quick disconnect and see if that helps. Also check your C coil and valve. Mine did that last year and I thought it was the C valve was bad. I would take it out and clean it with Kerosene and try it.
     
  3. rmarksb

    rmarksb Junior Member
    Messages: 24

    angle

    i wonder how you can tell what type of plow it is like e-60 or what,
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    90% chance it's the C valve solenoid.
     
  5. ned5485

    ned5485 Member
    Messages: 36

    You can post a pic on here and these guys will know in about .002 seconds. Or, you can go to meyers.com and download the manual, it will give some measurements and have pics for comparison