1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Airflo MSS

Discussion in 'Commercial Snow Removal' started by RB, Feb 13, 2002.

  1. RB

    RB Senior Member
    Messages: 197

    My airflo mss has a single on/off switch and it seems that the spinner doesn't spin fast enough. Does anyone know if I can speed that spinner up?

    Also, Dino, do you have a U spinner for this machine?

    Thanx.
    Ron
     
  2. BRL

    BRL PlowSite.com - Veteran
    Messages: 1,277

    LOL That's like asking if a Policeman carries a gun, of course he does. Couldn't resist. ;)

    Sorry can't help with the faster spinner problem.
     
  3. OBRYANMAINT

    OBRYANMAINT PlowSite.com Veteran
    from ohio
    Messages: 534

    i have a urethane spinner that i bought off of dino,should fit what you have . I only used it one season ....its pretty much brand new. cannot really use it . ten bucks over shipping!!!!!!!????

    i believe it cost me 70 bucks , but it just sitting on the shelf now
     
  4. plowking35

    plowking35 2000 Club Member
    from SE CT
    Messages: 2,923

    Rb how is that unit wired?
    You need to have at least a 4 gauge wire from the battery to a relay(we used a ford starter type unit), and then 4 gauage wire to the spreader mount at the rear of the truck.
    Next you will need 12v on a 12 gauge wire to a single pole switch in the cab, and then fianally from the switch to the relay.
    I beleive wwe used a 12" spinner on our unit, and it helped a lot with pattern dispersal.
    If OB still has his spinner, that should work as well.
    Dino