1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

air-flo wiring question

Discussion in 'Ice Management' started by andrewlawnrangr, Dec 6, 2009.

  1. andrewlawnrangr

    andrewlawnrangr Senior Member
    Messages: 339

    i have an air flow v box with a new (last year) brigs motor. stored indoors and i am getting everything ready. have the spreader hooked up as usual... like last year when it worked fine... and the convayor and clutch spin when i start the motor. in the cab the control box for the clutch is in the OFF position. is the clutch frozen?
    i went through the whole spreader as far as wires. remove one at a time clean with emery paper and re install. checked my ground wire and that is fine
    any ideas
     
  2. snow7899

    snow7899 Senior Member
    Messages: 238

    Use a test light or a volt meter and check for power at the clutch. With the switch off you should have no power.:nod: The clutch may be stuck from sitting.