1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

After Market Blizzard 810 Parts????

Discussion in 'Blizzard Plows Discussion' started by thebosshodges, Dec 23, 2007.

  1. thebosshodges

    thebosshodges Junior Member
    from kc, mo
    Messages: 11

    Are There After Market Cutting Edges Available.
    I Need New Cutting Edges For My 810 But Factory Oringinal Only Lasted 7 Events And Are Almost Into The Moldboard!!!!!::cry:
  2. Joe D

    Joe D Senior Member
    Messages: 605

    I plan on getting these based on guys who use them and how much theyu make the edge last www.winterequipment.com look for the wear guards
  3. thebosshodges

    thebosshodges Junior Member
    from kc, mo
    Messages: 11

    Thankyou Joe
  4. Plowtoy

    Plowtoy Senior Member
    Messages: 929

    :cool:our local blizzard dealer is also a welding/fab. shop and just made me a cutting edge for my 680, the best part is that its now 1/2 inch thick instead of 3/8 and should last more than one season. i would strongly recommend checking with your local fab. shop. good luck dave
  5. T-MAN

    T-MAN PlowSite.com Addict
    Messages: 1,363

    How many hours in 7 events and what do you plow ?
    I have over 150 hours of drop time (actual plowing) on my original edges on my 04 -810. All commercial, and I do some roads as well.
    They still have plenty of life left. I need to double up my edges again, and they will last another couple seasons.
    Also excessive wear can be caused by improper push beam height. Guys lift there trucks or put larger tires on and dont re-set the push beam, this will burn em up quick.