1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Add-A-Leaf links

Discussion in 'Ford Trucks' started by f2501960, Oct 26, 2002.

  1. f2501960

    f2501960 Junior Member
    Messages: 7

    Please provide any links to sites that sell add-a-leafs for my 250 listed below. I did not find them on Trailmaster or Superlift.

    Thanks Guys :drinkup:
     
  2. Rooster

    Rooster Member
    from Kansas
    Messages: 650

  3. NoSnow

    NoSnow Member
    Messages: 32

  4. Brickman

    Brickman Senior Member
    Messages: 133

  5. SCAPEASAURUSREX

    SCAPEASAURUSREX Senior Member
    from NJ
    Messages: 196

    Go to a local spring shop and have them set them up for you to your specs... And or get Timbren load boosters.. Think its' www.timbren.com I put two leafs in back with the timbrens and one up front.. I dont sag at all with the trailer hooked up unless i'm full of wet grass... .
     
  6. Dockboy

    Dockboy Guest
    Messages: 0

  7. Ben

    Ben Member
    Messages: 62

    I have a 1990 f250 how hard are the add a leafs to put on? Thanks Ben
     
  8. NoSnow

    NoSnow Member
    Messages: 32

    Took me 2-3 hours to do the rear axle.
    Fighting rust is biggest problem, other than that pretty simple job.
     
  9. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,138

    I fight rust with the torch!You should probably get new U-bolts anyways so just cut the old ones off,you will save a lot of headaches in the long run,also C clamp your springs together before you take out the center bolt on your leaf pack,trust me you will save hours and hours of screwing around this way!I learned the hard way,also another set of hands is helpful,read the instructions and take your time,probably a couple hours but not that difficult
     
  10. Ben

    Ben Member
    Messages: 62

    Thanks, Im going to order a set today.
     
  11. Rooster

    Rooster Member
    from Kansas
    Messages: 650

    I gave up, had a spring shop do mine. GREAT almost a 1 ton.

    Thanks a lot to Dockboy for the info on the leafs!

    Rick
     
  12. Dockboy

    Dockboy Guest
    Messages: 0

    No Problem Rick:drinkup:

    Greg