1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

A Request Of Toby

Discussion in 'Sno-Way Discussion' started by koko, Jan 16, 2009.

  1. koko

    koko Junior Member
    Messages: 15

    hi there just looking for Toby. If possible could you post the links for the manuals for a 32 series plow for a 2003 F250. I am looking for mounting directions and all plow info possible. This must be one of the early models because even though it is a 2 pin mount, it has regular push in pins and then a cotter lock, not the new spring loaded ones. I just bought the plow used and looking to install this weekend. Thank You very much in advance. Koko
  2. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

    Here are the manuals that you requested.

    Owner's Manual http://www.snoway.com/service/Owner Manuals/97100828e.pdf

    Part's Manual http://www.snoway.com/service/Parts Manuals/97100829i.pdf

    Subframe Installation Guide http://www.snoway.com/service/Subframes/97101224b.pdf

    Light harness Installation Guide http://www.snoway.com/service/LightKits/97100353d.pdf

    Adapter harness Installation Guide if you have HB5 connectors. http://www.snoway.com/service/LightKits/97100658b.pdf

    I have included the light info assuming that since this is a loose pin model it does not have our EIS lighting system. Let me know and if it does I can get you the install guides for those also.
  3. koko

    koko Junior Member
    Messages: 15

    thanks again. i really appreciate the quick reply, also how do i know if i have hb5 headlights? and what is EIS system?
  4. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

    You can get your truck light info off either the lens or connectors.

    You would be able to identify EIS by comparing what you have with the installation guides I linked you. Connectors will be different.
  5. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Welcome to the Sno-Way family koko.
  6. koko

    koko Junior Member
    Messages: 15

    thanks, i have not had a chance to mount it yet, because it is missing 2 brackets. the place where i got it is working on getting them and shipping to me, but i can't wait to try it.
  7. Camden

    Camden PlowSite Fanatic
    Messages: 6,594

    Tom it took you 18 minutes to give that guy a response, do you think you could speed it up next time? :jester:
  8. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    Hey he got faster the second time.:D