1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

'99 Dodge RAM rt-2 wiring question

Discussion in 'Boss Plows Discussion' started by jslash, Dec 1, 2009.

  1. jslash

    jslash Junior Member
    Messages: 8

    Hi all,

    I recently picked up an rt-2 plow for my '99 RAM diesel. I have the undercarriage mounted, cleaned up the plow and now I'm installing the wiring harness. My question is where is the best place to tap into power under the dash? I'm hoping someone has done this and snapped a few pics... ;)

    Any suggestions will be greatly appreciated!

    TIA,

    Jim

    ----
    1999 Dodge RAM turbo diesel, automatic, quad cab, short box
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Look to see if you have a 25 AMP fuse in the fuse #6 location in the fuse panel. Should be hot only with the ignition in the run or accessory position. If you have it that's the one I use when I can.

    Make sure you connect to the hot side of the fuse, not the protected side.