1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

97 K2500 codes?

Discussion in 'Chevy Trucks' started by EricD701, Oct 26, 2011.

  1. EricD701

    EricD701 Senior Member
    Messages: 150

    Hi I have a 1997 K2500 5.7 I am getting the following codes

    P0171 system to lean bank 1

    P0174 system to lean bank 2

    P0175 system to rich bank 2
     
  2. mike54017

    mike54017 Junior Member
    Messages: 1

    Bad o2

    Possible bad o2 sensor or an intake leak.
    Maybe bad cat convertor

    mike
     
  3. EricD701

    EricD701 Senior Member
    Messages: 150

    Thanks Mike

    I replaced the rear O2 censor last year, I did notice I have a couple of cracks in my exhaust manifold. Do you think this would cause the codes that I'm seeing?
     
  4. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    belive it or not but cracks in exaust manifolds will suck air and mess up o2 reading .

    good place to start is replace the bad manifolds and recheck for leaks again.

    also soak the egr tube nuts real good with pb blaster for a few days to help get that sucker loose. and go slow and dont force it if it snaps its new tube time. = payup
     
  5. EricD701

    EricD701 Senior Member
    Messages: 150

    Thanks I will give that a shot.

    Not looking forward to the egr tube hope I get lucky and it doesn’t snap.
     
  6. lilweeds

    lilweeds PlowSite.com Addict
    Messages: 1,178

    Clean you MAF sensor on the intake. If it gets dirty it can set those codes.
     
  7. 06Sierra

    06Sierra PlowSite.com Addict
    from Maine
    Messages: 1,329

    Get some SeaFoam deep creep. I have never seen anything like it for rusted bolts.