1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

96 Dodge ram 2500 PART OUT

Discussion in 'Used Plowing and Truck Equipment Forum' started by killed300ex, Mar 20, 2007.

  1. killed300ex

    killed300ex Senior Member
    Messages: 293

    I am parting out a 96 dodge ram 2500. Truck was rear ended and totaled. The front half of the truck is still good. The engine and trans and hood have been spoken for. Still have a good front end both fenders and the drivers door. List what you want and I will see what I have. All prices are best offer. Truck is located in Rochester NH if there is any interest in picking up parts. Will also sell the truck whole if someone want it minus the engine trans and hood.
    Truck had under 60K when totaled the front axle is a dana 44 8 lug rear axle dana 60 looks straight but cant tell untill its removed from the truck. Both have 3.55 gears.
    Evan
     
  2. killed300ex

    killed300ex Senior Member
    Messages: 293

  3. THEGOLDPRO

    THEGOLDPRO PlowSite Veteran
    Messages: 3,136

    hmmm cant think of anything i need ill keep thinking and let you know tho.
     
  4. Stark_Enterprises

    Stark_Enterprises Senior Member
    Messages: 318

    how much would you want for the front coil springs.?
     
  5. THEGOLDPRO

    THEGOLDPRO PlowSite Veteran
    Messages: 3,136

    is the dumb bed frame destroyed???
     
  6. Stark_Enterprises

    Stark_Enterprises Senior Member
    Messages: 318

    i would guess yeah..
     
  7. THEGOLDPRO

    THEGOLDPRO PlowSite Veteran
    Messages: 3,136

    hey you never know, its worth a try. my buddy is a master at welding and crap, so even if it was bent im sure he could make it work.
     
  8. Stark_Enterprises

    Stark_Enterprises Senior Member
    Messages: 318

    Yeah i hear ya maybe it will be fine...Those dump kits are mint!
     
  9. THEGOLDPRO

    THEGOLDPRO PlowSite Veteran
    Messages: 3,136

    yeah i know i have always wanted one, just didnt wanna spend top dollar for one, lol
     
  10. killed300ex

    killed300ex Senior Member
    Messages: 293

    The dump brackets got mangled but the sissor unit and pump are still good. ( The bed did attempt to go up when I fliped the switch before I took it off the truck) All one would need to fabricate is the piece that goes in between the crossmembers on the frame, the part that mounts to the bed, and the hinges. I can give the proper dimensions/pictures of the mangled parts for referance if someine is interested. If someine is wanting it I would sell for $400 obo. For the coilsprings maybe $50 for the pair + shipping?
    Evan
     
  11. Stark_Enterprises

    Stark_Enterprises Senior Member
    Messages: 318

    Put me down for the springs!!!!! ...ill pm ya my contact info
     
  12. Midwest BuildIt Inc

    Midwest BuildIt Inc PlowSite.com Addict
    Messages: 1,280

    My steering wheel is ripped up, what would you want for that?
    I really need the windshield washer reservoir, mine is cracked.

    thats all i can think of right now...
     
  13. killed300ex

    killed300ex Senior Member
    Messages: 293

    steering wheel probably isnt any better than yours. For the resevoir how about 30 shipped? If you want it PM me your info.
    EVan
     
  14. koko1485

    koko1485 Junior Member
    from Indiana
    Messages: 14

    would you take $25.00 shipped for the drivers side power window controller if it has both windows and the door lock button in it and it works?
    if so e mail me @ leanne@comteck.com
    jeff
     
  15. killed300ex

    killed300ex Senior Member
    Messages: 293

    Sorry the truck has manual windows and locks
     
  16. koko1485

    koko1485 Junior Member
    from Indiana
    Messages: 14

    how much for the fuel pump and sending unit should be all one unit?
     
  17. ChipsEarthWorks

    ChipsEarthWorks Senior Member
    from CT
    Messages: 105

    Is the fuel filler neck assembly okay??? if so how much for it? and will you be able to ship it to me in ct?? let me know asap mine is leaking.
     
  18. Sharpshooter77

    Sharpshooter77 Senior Member
    Messages: 162

    got any pics of the dump bed set up, I am interested in that. Could you let me know what the diementions on it are. and how bad the damage is on it. And would it fit a 1995 F-350???
     
  19. Sharpshooter77

    Sharpshooter77 Senior Member
    Messages: 162

    Any word on that dump set up???
     
  20. ChipsEarthWorks

    ChipsEarthWorks Senior Member
    from CT
    Messages: 105

    Any word on the fuel filler neck assembly?????