1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

96 chevy needs new flexplate

Discussion in 'Chevy Trucks' started by 515CUSTOMS, Nov 23, 2014.

  1. 515CUSTOMS

    515CUSTOMS Junior Member
    Messages: 28

    I have a 96 k1500 that needs a new flexplate, I'm going to do the flexplate, the tranny fluid, transfer case fluid, all the u joints Is there anything else I should do when i have it all apart, maybe the torque converter, it drove fine before the stater started messing up.

    Thanks Joe/515customs
     
  2. carkey351

    carkey351 Senior Member
    Messages: 229

    yes, replace the rear main oil seal while you have it apart...my $.02
     
  3. gmcdan

    gmcdan Senior Member
    Messages: 107

    transfer case slip yoke seal .
     
  4. Plowtoy

    Plowtoy Senior Member
    Messages: 929

    X2

    Being a 4L60, if you have not put the "beast" in it yet, now would be a good time to do that as well. Otherwise, when it fails (and it will) you will be wishing you did it now. The "beast" is a hardend reaction sun shell gear availible in the aftermarket. When the OE sun shell gear fails, you will loose reverse, 2nd and OD.
     
  5. JDosch

    JDosch Senior Member
    from Joliet
    Messages: 130

    I would also do the torque converter seal on the front of the trans.