1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

9' MC Series angling problems

Discussion in 'Fisher Engineering Discussion' started by js69351c, Nov 18, 2009.

  1. js69351c

    js69351c Junior Member
    Messages: 1

    I have a 9' MC series plow on my case 580 backhoe and am trying to make angle with the fisher hydraulic pump and solenoid, but without the isolation modual. We are using a momentary switch for left and right angle, no up and down needed. Right now the plow only angles left for either switch direction. Is this possible to make work? It seems that both coils are working correctly. Any help would be great.
    Thanks
     
  2. buddymanzpop

    buddymanzpop Senior Member
    Messages: 599

    Check the cartridges make sure they open when the coils are powered, could be stuck or if the cartridge is bent it won't open.