1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

9' HD Uni-mount

Discussion in 'Western Plows Discussion' started by jkiser96, Dec 3, 2009.

  1. jkiser96

    jkiser96 Senior Member
    Messages: 401

    I have aquired a 9' uni-munt plow for my F-700 but it needs wiring. I wondered if the truck side harness is universal or if these were truck specific. The previous owner cut the light wires & tried to rig up the wiring for them. Any info is appreciated.
     
  2. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    Year make and model of the vehicle????
    What kind of headlights if possible???
    9pin harness???
     
    Last edited: Dec 3, 2009
  3. jkiser96

    jkiser96 Senior Member
    Messages: 401

    The plow is going on a 1988 F-700 with sealed beam headlights. I will have to look at the plug to see how many pins are there.
     
  4. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    If you have a "3 Port Isolation Module: #29070-1 or 29060

    Then the Headlamp Harness should be # 29053 & 29234
    The light kit #29053 & 29234

    This info was from western Quick match.
     
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Forget about the Isolation setup. The Uni will be a two plug relay system.

    Do you have the main control harness and battery leads and such? If so, all you'll need to tie into the headlamps correctly will be the headlight adapter harness for the light style of the truck.
     
  6. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

  7. jkiser96

    jkiser96 Senior Member
    Messages: 401

    I don't have any trucks side wiring. I hope to get that this week.
     
  8. 33yearsinsnow

    33yearsinsnow Senior Member
    from ohio
    Messages: 111

    If you have 2 plugs on your plow, the main 2 big pin harness and the 9 pin light/hydraulic harness then you can hook this plow up with the relay system.
    For the truck side you will need part #61169 main battery plug, #56131K-1 Solenoid, #22511 battery cable, #56137 Hydraulic power cable, 2 - #61548k covers. I believe your headlight adapter will be for 2B/2A headlights but you will have to confirm that but if so the harness # is 61546 and I believe 2 relays #61535K if you have cab marker lights then you will also need adapter harness #61185. Also if you do not have one you will need a cab controller #56369 Joystick or #56462 handheld.
     
  9. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683