1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

9' Fisher MC Plow

Discussion in 'Used Plowing and Truck Equipment Forum' started by fordpsd, Jan 20, 2010.

  1. fordpsd

    fordpsd Senior Member
    Messages: 308

    I have a 9' Fisher minute mount MC plow. In good condition, three plug set-up. Asking $1900.00 obo. Will have pictures up later tonight.
     
  2. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    I might be intrested Send pics to brad2500hd@aol.com Im rite in mass.Also please include a phone number.


    brad
    508 345 5373
     
  3. abbe

    abbe Senior Member
    from RI
    Messages: 719

    my buddy sent you the pictures
     
  4. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    No pics yet.
     
  5. fordpsd

    fordpsd Senior Member
    Messages: 308

    Here are some pictures.

    IMG00148-20100120-1534.jpg

    IMG00147-20100120-1533.jpg

    IMG00146-20100120-1533.jpg
     
  6. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Does it have a trip edge left? That cutting edge is almost worn to the bolts.
     
  7. abbe

    abbe Senior Member
    from RI
    Messages: 719

    Yeah the cutting edge still has a inch left on it...it not even close to the bolts. I can snap some more pics if you want
     
  8. cet

    cet PlowSite Fanatic
    Messages: 7,202

    Isn't that cutting edge reversible also.
     
  9. abbe

    abbe Senior Member
    from RI
    Messages: 719

    i believe your right
     
  10. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Yes it is and it looks like it may have been flipped already.
     
  11. abbe

    abbe Senior Member
    from RI
    Messages: 719

    My buddy has some more pictures to put up. The pictures are decieving. The edge hasn't been flipped and the side its on now still haw a good inch of wear left before it even hits the trip edge
     
  12. WheelerandSon

    WheelerandSon Member
    Messages: 74

    i see that this plow is on a Ford Super Duty. Does this plow come with the mounts and controller for that truck? I have a 2001 F250 Super Duty.
     
  13. abbe

    abbe Senior Member
    from RI
    Messages: 719

    No mounts or wiring but for the rigt deal I can put a controller in. This is a heavy duty mc series. This cost some serious money new so I didn't think 1900 for the off truck is a bad deal especially since the blade is in such good condition and paint.
     
  14. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    A mc series is designed for some f 450s but more for 550 and 650.
     
  15. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    9' MC 1350 lbs
    For vehicles in the 17,000-27,500 GVW range according to fisher.

    I am intrested in it and we have a nice f 650 to put it on but we dont have any work lined up for the truck, so its hard to pull the trigger.
     
  16. abbe

    abbe Senior Member
    from RI
    Messages: 719

    Yea let me tell you, that sucker puts the hurt on my f250, just moving it. i would never reccomend trying to plow with it on anything less then a 450. Brad96, if you want to email me at pabbenante1@yahoo.com we could try to work a deal out if it would help you out.
     
  17. fordpsd

    fordpsd Senior Member
    Messages: 308

    Here are a couple pictures of the cutting edge.

    DSCN1169.jpg

    DSCN1171.jpg
     
  18. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Thats not to bad at all.
     
  19. fordpsd

    fordpsd Senior Member
    Messages: 308

    Yeah that side still has some life on it and the edge has not been flipped yet, so there's still plenty of life left on the cutting edge.
     
  20. fordpsd

    fordpsd Senior Member
    Messages: 308

    back to the top