1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

9.2 poly on ford f250

Discussion in 'Boss Plows Discussion' started by plowman1984, Dec 26, 2011.

  1. plowman1984

    plowman1984 Member
    Messages: 63

    Has anybody done a 9.2 poly vxt on a 2011 ford f250 with a 6.2L gas moter? I was just wondering how it would handle pushing it.
     
  2. Ultra Duty

    Ultra Duty Member
    from NE OHIO
    Messages: 65

    shouldn't be a problem, just may need a leveling kit on the front.
     
  3. chitown sparky

    chitown sparky Senior Member
    Messages: 153

    what about on a 2007 2500 6 L
     
  4. Ultra Duty

    Ultra Duty Member
    from NE OHIO
    Messages: 65

    Same exact thing, 1" front spring spacer, less than $150 bucks and only takes an hour or two to do the job. DC the shocks, raise the chassis and do one side at a time. slide the spacer in and bolt the shock back in after you lower it.
     
  5. chitown sparky

    chitown sparky Senior Member
    Messages: 153

    I have timbrens on already does that matter
     
  6. Ultra Duty

    Ultra Duty Member
    from NE OHIO
    Messages: 65

    If you put a spacer on there it would probably mean that it would not hit the timbren because it was raised
     
  7. Can-Boy

    Can-Boy Member
    Messages: 46

    I bought 2 new 2011 6.2 with extended cabs and put 9.2 steel xt,s no problems.Awsum!