1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

8611 ss hoses

Discussion in 'Blizzard Plows Discussion' started by DODGE-BOY, Nov 21, 2009.


    DODGE-BOY Senior Member
    from OHIO
    Messages: 121

    Anyone have an experienced answer for a hose or shield of some type to go around the four hoses going through the sector.(two on each side) I noticed they are rubbing the hole cut out for them, especially on the back side, as the front hole is much bigger. Looks like some type of grommet may have been there but its slid forward. Can it be wrapped around the complete length or just around the rear hole? The other two hoses are easy, out in open. Could probably buy five different types before finding something to work, for sure. Pretty tight fit there.
  2. beam

    beam Senior Member
    from pa
    Messages: 314

    burn the hole bigger it will save the weight that DD does an get your self 1 inch rad hose and cut to fit