1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

810 vs. 810SS

Discussion in 'Commercial Snow Removal' started by rtm038, Jul 25, 2005.

  1. rtm038

    rtm038 Senior Member
    from NJ
    Messages: 231

    Are there any differences between the 810 and 810SS moldboard assemblies?

    Thanks
    Ryan
     
  2. festerw

    festerw Senior Member
    Messages: 986

    Yes the 810SS is built heavier for the skid steer, has a higher height, thicker moldboard and has 2 additional trip springs.
     
  3. ChloMag

    ChloMag Member
    Messages: 35

    specs

    SNOWPLOW MODEL 810SS
    Moldboard Width 102"
    Plow Width at Full Angle 118"
    Moldboard Height 34"
    Moldboard Thickness 11 gauge
    Reinforcement Ribs 6
    Torque Box Construction Yes
    Trip Springs 6
    Plow Shoes Cast Iron
    Cutting Edge (1080 Steel) 1/2" x 6" 3/8" x 12 1/2"
    Power Hitch Yes
    Plow Weight 950 lb.



    810
    Moldboard Width - Compact Position 96"
    Moldboard Width - WidePass Position 120"
    Moldboard Width - BucketBlade Position 111"
    Moldboard Height 31"
    Moldboard Thickness 12 gauge
    Reinforcement Ribs 6
    Torque Box Construction Yes
    Trip Springs 4
    Plow Shoes Cast Iron
    Cutting Edge (1080 Steel) 1/2" x 6"
    Wing Cutting Edge (T1) 1/4" x 10"
    Power Hitch Yes
    Plow Weight (Complete) 950 lb.