1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

810 lift cylinder

Discussion in 'Blizzard Plows Discussion' started by plowin-fire, Oct 31, 2012.

  1. plowin-fire

    plowin-fire Senior Member
    Messages: 196

    Read earlier on here that a 8611 lift cylinder fits on the 810 with slight modifications. Anyone care to explain this or have pictures? Ordered one from Storks Auto today.
     
  2. Grassman09

    Grassman09 2000 Club Member
    Messages: 2,806

    Jerre from Jerre's services would be the one of the ones to ask.
     
  3. maelawncare

    maelawncare Senior Member
    Messages: 871

    Yes, I run one on mine. Lifts better.
     
  4. plowin-fire

    plowin-fire Senior Member
    Messages: 196

    Fits right in?
     
  5. lilweeds

    lilweeds PlowSite.com Addict
    Messages: 1,178

    Minor mods from what I gather it's just a little grinding. Should be pretty easy to see.
     
  6. Mark Witcher

    Mark Witcher Senior Member
    Messages: 604

    With the bigger cylinder its going to lift slower if you dont use the 8611 pump.
     
  7. plowin-fire

    plowin-fire Senior Member
    Messages: 196

    That would have been helpful to know eariler... I will see how it works and go from there.
     
  8. plowin-fire

    plowin-fire Senior Member
    Messages: 196

    Got it in tonight. Had to cut out a 2" long by 3/4" triangle on both sides underneath. Lifts a little slower and goes down a little slower. Not too bad though.
     
  9. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    Adjust your drop speed. you'll be surprised.