1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

8' Fisher blade.. Cheap

Discussion in 'Used Plowing and Truck Equipment Forum' started by Wicked500R, Jun 2, 2010.

  1. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    8' Fisher blade, I believe it was originally an MM 1st series. Real nice condition. 2 seasons on a total strip and rebuild. Blasted and painted with 10 coats total of oil base primer and safety yellow. NO rust. I welded a piece of 3/8" steel in between the base angle and mold board. This provides better attack angle and keeps the spring mounts from wearing. NEW base angle and cutting edge. Still around 5" wide. All new pins and spring sets. Stored indoors in the off season. This is what it looked like when I finished it. It's not quite this nice anymore.

    500.00 takes it.. The base angle alone cost me 500...lol
    I need this gone ASAP Call 201-259-9764

    [​IMG]
     
    Last edited: Jun 2, 2010
  2. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    I'm sure someone has a rusty beat up plow they need to upgrade.
     
  3. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,269

    I think the problem is even though its a nice blade, you can find a complete MM1 setup for $500 (I just bought an 8' all hydraulic setup for $250- in rough shape though). Best of luck.
     
  4. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    This blade had all the hard labor and time put into it already. TTT
     
  5. mayhem

    mayhem PlowSite.com Addict
    from Peru MA
    Messages: 1,016

    Crap, I could use this too since my MM I has a hole in it. No Dinero though.

    Good Luck, looks nice.
     
  6. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    up..........
     
  7. MatthewG

    MatthewG PlowSite.com Addict
    Messages: 1,390

    How about some currrent pics, dad just bought a truck and might be interested, located in PA
     
  8. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    TTT, i'll get some new pics
     
  9. fallcreek

    fallcreek Junior Member
    from TN
    Messages: 23

    still have it?
     
  10. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    I got it and it's available. Why, you planning a road trip ? lol
     
  11. fallcreek

    fallcreek Junior Member
    from TN
    Messages: 23

    Have any new pics?
    What all comes with it?
     
  12. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    no new pics yet and this is just the blade..
     
  13. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    Ttt ....////
     
  14. PerfectProperty

    PerfectProperty Member
    Messages: 33

  15. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    The only part for sale is the blade. Yes, truck frame is custom built for 94'-02' Dodge 2500/3500 and is not included. The blade will work with other Fisher mounts...
     
  16. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    next at bat...
     
  17. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    new pics

    I was able to swing by the yard this am and get some crappy cell phone pics..
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  18. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Jul 19, 2010
  19. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    bumpskie.....
     
  20. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    how bout another looksie