1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

7.5' fisher mm to 8' blade

Discussion in 'Truck & Equipment Repair' started by fordguy55, Oct 4, 2011.

  1. fordguy55

    fordguy55 Junior Member
    from Maine
    Messages: 5

    I have a 7.5' fisher minute mount 1 ,3 wire plow and would like to install a 8' blade onto my existing setup. I have an older 8' conventional fisher blade but the A frame is different. Is it just a matter of getting a minute mount A frame to complete the install? Any insight would be helpfull thanks
     
  2. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

  3. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

    Why don't you just swap blades? Leave the current MM1 A-frame on there. Pull the 3 pins on the blade and you're done.
     
  4. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Well that depends on how late the mm1 plow is If its a late model 3 wire it would have the long pin like a mm2 and u cant interchange them. If it has the short pin u can swap just blades.
     
  5. neplow

    neplow Junior Member
    Messages: 28

    sell the other blade and put on some prowings.