1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

6Ft Meyers (I think) trip pin gone

Discussion in 'Meyer / Diamond Products Discussion' started by GSORK, Jan 20, 2011.

  1. GSORK

    GSORK Senior Member
    Messages: 128

    How do you replace the pin? One is missing and the other is stuck in the blade sleve. I assuume I can heat the tube and beat it out. Any info helpful. Are the diameters the same for the replacement..
    Thansk Gary.
     
  2. streetscrapin16

    streetscrapin16 Senior Member
    Messages: 161

    You can try to heat the tube and beat it out. We had to do that to one of our plows. If that didnt work cut the pin then cut the sleeve out and put a new sleeve in.
     
  3. GSORK

    GSORK Senior Member
    Messages: 128

    How is the install done?
     
  4. maverjohn

    maverjohn Senior Member
    Messages: 902

    Do a search on this topic, lots of talk about pin problems and lots of good info.
     
  5. GSORK

    GSORK Senior Member
    Messages: 128

    Typed in " trip pin replacement " in upper right hand search box. Did not find info I need. so i posted the thread. I usually find the search feature not very helpful.

    So if anyone has a link to this question .Let me know .
    Thanks Gary
     
  6. blogsdon

    blogsdon Member
    Messages: 63





    i had to replace one last week, heated it up, tried cutting through it , nothing would get it out, it w2as really stuck. ended up cutting a 1/4: slit across the top of thr sleeve and pounding it out. At least now I can grease it!!!

    Brian
     
  7. Bashby

    Bashby Senior Member
    Messages: 228

    It is pretty hard to get what you are looking for with the search thing sometimes. I have one pin siezed to the moldboard on mine and when I remove the other pin, I can manuever things around enough to separate the sector from the moldboard. Mine is REALLY worn so you may not be able to do that but if you can then you can get the BFH to thne pin and get it out. The tubes are available so you can cut them out and weld in new ones.
     
  8. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Here's a few just to get you started.

    http://www.plowsite.com/showthread.php?t=116134

    http://www.plowsite.com/showthread.php?t=111363

    http://www.plowsite.com/showthread.php?t=110951

    http://www.plowsite.com/showthread.php?t=86562

    http://www.plowsite.com/showthread.php?t=83033

    http://www.plowsite.com/showthread.php?t=50120

    http://www.plowsite.com/showthread.php?t=47820