1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

55+ community driveways.

Discussion in 'Commercial Snow Removal' started by BBrady10, Aug 14, 2015.

  1. BBrady10

    BBrady10 Junior Member
    Messages: 5

    Looking at a community that has 3 sections where we would be responsbible for driveways. These are 2 car drives but some are joined with the neighboring house ( Duplex ). Trying to figure out what the most effectient piece of equipment is. Just back drag with SS plow? Kage to back drag and then box to pile? Back blade on tractor? Snowblower on SS or Walk behind SS? Some home made contraption to pull the snow to the street? I know someone has tried everything and come up with a best practice!! 2 Inch trigger and concrete drives so they dont want steel edge...
     
  2. dodgegmc1213

    dodgegmc1213 PlowSite.com Addict
    Messages: 1,002

    Tractor with an inverted blower would be ideal and I'm sure alot of people would say the same
     
  3. Dogplow Dodge

    Dogplow Dodge 2000 Club Member
    from NJ
    Messages: 2,933

    Send a letter to all the old gentlemen in the facilities and tell them that you will supply Viagra to them, if they clear their own driveways to the street. Then you can just push the piles down the road.


    https://www.youtube.com/watch?v=YAcLViTHDOo
     
  4. Randall Ave

    Randall Ave PlowSite.com Addict
    Messages: 1,964

    Yur a sick man.
     
  5. Neige

    Neige Sponsor
    Messages: 2,197

    A 60 HP hydrostatic tractor with a Normand inverted blower would be best.
    This would require that you purchase a tractor. If you already own a skid steer max 65 HP then a Metal Pless ReverseMaxx with poly cutting edges would be great. This plow has hydraulic wings that are 30 inches long and the moldboard is seven feet wide and 26 inches high. There is no angulation on this plow, and should you ever need steel cutting edges, this plow is ready to receive them.
    Hope this helps
     
  6. johnnyusa

    johnnyusa Member
    from ct
    Messages: 78

    front mount 4wd mower with snow blower