1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

28V power connectors

Discussion in 'Sno-Way Discussion' started by CRTracing, Dec 13, 2008.

  1. CRTracing

    CRTracing Junior Member
    Messages: 4

    Have a Sno-way 28V plow with the round pin type power connectors connecting the power from the truck to the plow. Is there a new type of connector conversion system available that eliminates the twisting of the male/female connectors to a more simple plug in/plug out type?

    The aluminum twist connectors are a pain and my bracket that is mounted to the truck that holds the male connectors is getting old and worn out.

    I am looking for something that can also be more waist height coming out of the grille instead of down near the ground.

    Also can someone provide me with a link or PDF of a wiring diagram for a 28V using the old relay/lobo system used on a 06 2500HD. I am having an issue where the passenger truck light will stay on when plow is connected

    Great site!!
     
    Last edited: Dec 13, 2008
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    You can change that out to a new style power plug and the plug of your choice without issue or you could use this method.

    http://www.plowsite.com/showthread.php?t=64775

    You might find the plugs locally, they are not an uncommon item on larger trucks. with your Vee you might need Two

    As for your lights: what harness and adapters are you currently using? Your 06 should have the 991000529 harness and a 99100592 adapter.

    http://www.snoway.com/service/LightKits/97100798A.pdf is the harness
    http://www.snoway.com/service/LightKits/97100878b.pdf is the adapter

    Good luck

    Welcome to Plowsite.:waving: